Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Mistakes To Avoid When Installing Doors

by | Feb 8, 2021 | Health | 0 comments

A good chance is that you have put in hundreds of exterior doors over the years, from cheap builder’s grade doors to grand, high-end custom doors and everything else in between. No matter how fancy, Doors have joint problems that can cause mistakes, delays, or even a failed building inspection report. These problems can happen no matter how fancy the door is. Here are mistakes to avoid during door installation in Coogee, 

Using The Wrong Screws For The Hinges.

One of the most common mistakes we see repeatedly is when people do not think the hinge screw is that important. This screw will hold your door in place. Hinges that are too small will not be able to hold the weight of your door well. As soon as you get in the door, you will be scraping on the floor and not be able to close it very well.

Measuring Incorrectly

Doors are not one of the things you can always figure out. Getting the right measurements is very important to get a good fit. For your door to be the right size, take a tape measure and write down the dimensions of your door and how wide and long it is, along with how thick it is. For pre-hung doors with an edge, remove the old frame and measure the whole opening.

Using the Wrong Screws

This is another mistake to avoid. It is essential to ensure that the screws to connect the hinges are the correct size. The hinges will not be able to hold the weight of your door when you use the wrong screws. If this happens, you might have to scrape your way through things.

Putting screws in can be dangerous, too. The tighter the screws are, the more stress you put on your material. Too much stress can cause the fabric to warp.

Over Trimming

As even if you double-checked all your measurements, there is a chance your new door will not fit very well. After all, it is not easy to measure down to the exact millimetre, so it’s not that simple. To make your door fit, you can cut it down. But many people make their doors too big, so they don’t fit very well. 

Using the Wrong Tools

You cannot likely do door installation in Coogee without the right tools. Even if you can do the job, it will take longer. The best thing to do is either buy the tools you need to do the job right or hire a professional to do it for you the first time.

Installing Doors Yourself

The main reason people want to put up their doors is to save money. The truth is that they end up spending hours and hours trying to put their door in the right way, only never to get it right.  

It’s time to put in the header after your doors and side jambs are in place. Make sure the two side jambs line up with each other. Screw it to the wall. In this part of the door installation in Coogee, you should keep the door open so it doesn’t get in the way. Once the main features are in place, you can now put the handle, door frame, and drip rail on your shower door. 

Please follow & like us 🙂


Our Categories

Recent Comments