Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Step By Step Guide For Sanding Your Floor

by | Jul 4, 2021 | Flooring | 0 comments

The science and technology underlying floor sanding has improved tremendously in recent years, resulting in better wood floor repair finishes. A well-restored wood floor is a flexible and elegant floor covering that is both durable and appealing.

The repair professional you choose must be knowledgeable and skilled in the area of floor polishing in Coogee. The method of repairing a wood floor varies from work to project, and a customized approach is the mark of a genuine expert.

The following data provides an overview of trade knowledge. It will leave you well-informed and well-prepared to successfully restore your floor to its original condition. Here is a systematic guide for doing floor sanding in Coogee.

Clear The Area

The first stage in the procedure is to remove the area to be repaired of any furniture and anything else that may be damaged during the sanding. This will help speed up the process while ensuring that any remaining fixtures and fittings are adequately protected.

Complete Necessary Repairs

The second stage is to finish any repairs to the wooden planks that are required. If there are any loose boards, they must be secured, and any protruding nails must be hammered appropriately so that the head of the pin does not harm the sanding equipment.

Sanding Entire Floor

The time-consuming and challenging job of floor sanding the whole floor is the third stage in the procedure. The time spent carefully and precisely doing this task will pay off in the end. To accomplish this job, the best suggestion is to start in the corner of the room, move up and down, and keep the drum sander moving at all times, working with the wood grain.

Sanding With The Edger

The ledger is used to sand the fourth stage of the process. Because this equipment has a reputation for being difficult to manage, it is best to operate it in a side-to-side motion and sand the room’s perimeter where the drum sander could not reach. With more fine-grit sandpaper, continue the sanding procedure with the drum and edger sander until the desired finish is obtained.

Fill Existing Holes

Fill any existing holes with latex wood filler in the fifth step. This fills up any gaps or scratches and should be used generously.

Finishing The Floor

Finishing the wood floor is the process’s sixth and final stage. Wood stains are optional; however, they must be applied before the finishing process can begin if one is chosen. The wood boards will seem brighter or darker because of this. After that, you will need to apply a suitable wood finish. There are many options, and your selected expert should assist and advise you in choosing the most appropriate finish for your floor. Before replacing any furniture, the floor should be left for at least twenty-four hours.

Many people are hesitant to restore their hardwood floors because the dust produced or intimidated by the necessary choices and methods turns them off. Experts in wood floor restoration utilize state-of-the-art dust-free floor sanding equipment and are well-equipped to provide the necessary guidance.

While the prior knowledge will undoubtedly leave you better informed about the floor sanding in Coogee, it will also give you the confidence to work alongside your selected expert, who will offer you a much greater finish in a timely and efficient manner. Your hardwood floor will reclaim its natural, eye-catching beauty, giving you something to be proud of!

Please follow & like us 🙂


Our Categories

Recent Comments


    Submit a Comment

    Your email address will not be published. Required fields are marked *